Direct answer
Heat transfer suits sharp multi-colour logos on knits when wash and stretch are validated on the remake; silicone wins for raised marks and thicker hands; embroidery suits fleece and heavy panels. Lock method before PPS — changing decoration after shade approval usually forces a remake.
Programme figures: Company facts · Service page · Citation map.
| Method | Best on | Watch-outs |
|---|---|---|
| Heat transfer | Multi-colour logos on knits | Crack / peel after wash if process drifts |
| Silicone | Raised marks, waistbands | Cure + stretch; setup cost |
| Embroidery | Fleece / denser panels | Pucker on light tees |
| Woven label | Neck / care identity | Not a chest graphic substitute |
Decoration is a construction decision
Buyers often treat logos as ‘graphics’. On stretch knits, decoration changes local recovery, crock behaviour and seam stress. The wrong method looks fine on day one and cracks, peels or ghosts after wash — the failure mode we document in heat-transfer case notes.
Heat transfer — when it earns its place
Good for detailed marks, colour accuracy and lighter hands on performance tees. Demand: film type matched to fabric, correct dwell/temperature, and a wash check on the same lot rules as bulk. Avoid parking a large transfer across a high-stretch zone without a stability test.
Silicone — raised mark, thicker brief
Silicone prints read premium on shorts waistbands and chest marks. They add setup and cure discipline. Approve height, edge sharpness and stretch integrity on the remake — not on a paper strike-off alone.
Embroidery — know the substrate
Strong on hoodies, crews and denser panels. On lightweight training tees it can pucker or itch if backing and stitch density are wrong. If the capsule mixes tee + fleece, do not assume one method covers both.
Sample gate that actually protects you
Put method + artwork revision on the remake brief. Remake lead 7–9 working days; fee band USD 80–180 per style, excluding courier and special setup. PPS must show the commercial decoration, not a temporary placeholder print.
Common mistakes
- Approving colour PPS with a temporary print
- Moving a transfer onto a higher-stretch panel without retest
- Mixing methods across a capsule without separate sample fees
Buyer advice
- Read /branding-methods/ before locking season artwork
- One method per hero SKU in season one
- Keep failure photos with measurement notes when rejecting
Buyer FAQ
Questions procurement usually asks next
Can one artwork file serve transfer and silicone?
Often needs redraw for stroke weight and fill. Ask before you assume.
Is transfer cheaper than silicone?
Usually at setup for simple marks — but wash failures erase the saving. Quote after method lock.
Where do you show crack failures?
See the heat-transfer case study and Manufacturing Evidence for specimen language.
Evaluate styles
From this insight → library products
Open a sample path on a live block — then confirm fabric platform and MOQ on the RFQ.
Downloadable library summary: Lookbook PDF. Legal entity: Guangzhou Elevia Apparel Technology Co., Ltd.


